Metz 32Z-1Manual/Auto Thyristor Flash | $107.95 | |  |
Although the 32 Z-1 lacks the SCA capability of its 32 Z-2 counterpart, this powerful, compact flash unit does not compromise when it is a matter of performance with the manual zoom reflector for focal lengths from 28 to 85 mm, and telecomputer with 3 aut
o working apertures.
The aperture calculator indicates the film speed, the working aperture, the reflector position and the applicable flash range. Correct exposure indication gives the user added certainty, particularly since it can be completed prior
to the actual exposure by way of the manual release.
Features- Guide number The guide number provides information on the light output of the flash unit.
- Manual Manual mode for full light output at the specified guide number.
- Manual zoom As power zoom, except manually adjustable.
- Tilt-and-swivel reflector Can be swiveled horizontally and/or tilted vertically by the specified angle for bounce flash photography.
- Flash-ready indication Indicates whether the flash capacitor is fully charged.
- Automatic switch-off function This feature prevents unnecessary power consumption if the flash unit has not been switched off after use or during prolonged operating intervals.
- TTL flash control TTL (through-the-lens) flash control is performed by the flash unit in conjunction with SCA adapters if the camera features TTL flash metering.
- Correct-exposure signal Lights up to indicate that the frame was correctly exposed.
- LED A Light Emitting Diode used to display the selected telecomputer aperture, zoom settings, etc
- Winder mode Allows to shoot a sequence of pictures at a rate of 2 or 3 frames/sec.
- IGBT An electronic system that ensures accurate light output control for power economizing operation.
- Partial light output mode Allows to diminish the light output level and to program a fixed flash duration.
- Program memory Allows the storage of individual favorite settings in a memory for 9 flash programs for instant recall at the touch of a button.
- Power source This symbol specifies the type of power source that can be used for the given flash unit.
- Battery tester Indicates, at the touch of a button, the current status of the battery charge.
|
|
